Light instead of sand and chemicals

A laser removes rust, paint, grease, and surface deposits by directing focused light energy into the unwanted layer. There are no abrasives, no chemical waste, and no unnecessary damage to the substrate.

How it works

The process is called laser ablation. The unwanted layer and the underlying substrate react differently to the same light—and the entire process builds on that difference.

Laser head sends pulses onto the rust layer, leaving a clean surface behind pass direction Short laserpulses Cleaned surface Rust, paint,contaminants Base material remains intact
Simplified illustration. The actual laser beam is invisible to the eye.
  1. Short, powerful pulses

    The laser emits a focused beam in rapid pulses while the scanning head sweeps it across the surface in a fine line.

  2. Contaminants absorb the energy

    Rust, paint, and deposits absorb light much more strongly than bare metal. The layer heats up instantly, vaporizes, or detaches from the base.

  3. The substrate stays intact

    Once the contaminant layer is gone, the metal substrate reflects most of the light. With proper settings, the base material loses neither thickness nor shape.

  4. No secondary media to dispose of

    The removed layer turns into fumes and fine dust captured by our extractor. No sand, blasting grit, or chemical waste remains.

Laser beam leaves a clean, bright stripe across a dark steel plate in a single pass, with sparks

The trace of a single pass

High-speed galvo mirrors inside the handheld head steer the beam across the work surface.

Where the beam has passed, the dark oxide layer is completely removed, revealing bright bare metal underneath.

Pass by pass, the process repeats until the entire surface is uniformly clean.

Pulsed or continuous-wave laser

Two types of laser sources are used for surface cleaning. The right choice depends on the substrate, layer thickness, and thermal sensitivity.

Precise and gentle

Energy arrives in ultra-short pulses with high peak power. The contaminant layer is ablated while the substrate barely heats up.

  • Tooling, moulds, precision machine parts
  • Heat-sensitive metals and thin sheet metal
  • Classic car and antique restoration
  • Industrial production lines
Pulsed laser delivers short power peaks and a minimal heat-affected zone; continuous laser delivers steady power and a larger heat zone Laser power over time Substrate heat-affected zone

Not sure which one you need? We give our recommendation after testing on your material. View machines

Laser vs. traditional methods

Every method has its place. Laser cleaning excels where precision, a clean working environment, and in-place treatment without disassembly matter most.

Comparison of laser cleaning with sandblasting, chemical stripping, and mechanical grinding
Criterion Laser cleaning Sandblasting Chemical stripping Grinding
Consumable media None—electricity only Sand, grit, or blasting beads Harsh chemical solvents Abrasive discs and belts
Effect on substrate Leaves substrate intact with proper settings Removes base material and alters roughness Can etch metal and damage seals Removes material and alters geometry
Waste generated Only the removed layer, captured by extraction Large volumes of spent grit and dust Hazardous chemical waste requiring disposal Dust and worn abrasive media
Precision Pinpoint accuracy, even on complex geometries Hard to localize; requires masking Difficult to control on localized areas Limited by tool access and operator skill
In-plant operation Often done without disassembly and with minimal setup Requires containment and extensive cleanup Requires ventilation and spill containment Creates dust and sparks in the workspace
Best suited for Precision work, sensitive surfaces, on-site maintenance Large, heavy structures where surface profiling is acceptable Complex parts that can be immersed in tanks Small spot repairs on flat surfaces

From steel to stone

Every substrate and coating reacts differently. Before any major project, we run a test patch on a representative sample to confirm the exact parameters.

Base materials

  • Steel & cast iron
  • Stainless steel (Inox)
  • Aluminium
  • Copper & brass
  • Wood
  • Stone
  • Concrete & brick
  • Moulds & tooling

What we remove

  • Rust & oxidation
  • Paint & varnish
  • Fillers & adhesives
  • Graffiti
  • Grease & oil
  • Soot & fire residue
Laser stripping old varnish from a wooden chair

Application areas

From heritage antiques to industrial machinery. We work at our workshop in Vukovar or on-site at your facility.

Steel bracket after laser cleaning, free of rust down to grey metal Same steel bracket covered in rust before treatment After Before
Steel bracketRust removed with laser, without sandblasting
Concrete wallMoss and dirt removed without chemicals
Specialized service

Fire damage remediation

Soot and smoke deposits on buildings, walls, ceilings, and facades. Treated surfaces are clean and ready for renovation.

Manufacturing & industry

Machinery, metal assemblies, and moulds. Weld and coating preparation, plus removal of oil and filler residues.

Food processing plants

Ovens, conveyor lines, and moulds cleaned without chemicals—leaving surfaces clean and sanitized.

Vehicles & mechanics

Rims, engine blocks and heads, turbochargers, exhaust manifolds. Ideal preparation for painting or plating.

Metalwork & antiques

Vintage coins, sculptures, wrought-iron gates and railings, lighting fixtures, and antique furniture hardware.

Stone & facades

Building facades, decorative stone elements, and stone walls. Graffiti removed without damaging the stone surface.

Wood & furniture

Old varnish and paint removed from furniture, beams, and panelling after a discreet test patch.

Home & yard

Grills, stoves, cooktops, patios, driveways, steps, and garden fences.

Additional services

Protective coating and painting of cleaned surfaces, plus condition assessment and method consulting.

Mobile laser cleaning machine with emergency stop button and key switch

Safe operation through clear rules

Laser cleaning units are powerful industrial systems. Safe operation relies on a few straightforward, mandatory rules.

  • Laser safety eyewear matched to the exact laser wavelength
  • Marked work zone restricted to authorized personnel
  • Fume and particulate extraction at the point of ablation
  • Operation exclusively by trained staff

Safety equipment

Show us the surface you need cleaned

Send us photos or give us a call. For companies, we offer a free on-site demonstration on your own equipment or samples.

Call us Send inquiry